BSTXS - CURCUMIN, F916
- MSDS: BSTXS
- Manufacturer: J T BAKER INC
- Product Name: CURCUMIN, F916
- National Stock Number: 6810-00-300-6189
Product Identification
Product ID:CURCUMIN, F916
MSDS Date:05/01/1989
FSC:6810
NIIN:00-300-6189
MSDS Number: BSTXS
Responsible Party
PHILLIPSBURG, NJ 08865
US
Emergency Phone: 800-424-8802;800-424-9300(CHEMTREC)
Info Phone: 201-839-2151
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
1,6-HEPTADIENE-3,5-DIONE, 1,7-BIS
CAS: 458-37-7
RTECS: MI5230000
Fraction By Weight: 90-100%
Hazards
LD50 LC50 Mixture:1500 MG/KG (MOUSE)
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL/SKIN/EYE/SKIN
ABSORP/INGEST: NONE IDENTIFIED BY MANUFACTURER. CHRONIC: NONE
IDENTIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGEST: IMMED GIVE LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION. INHAL: MOVE TO FRESH AIR. SKIN: IMMED WASH WITH PLENTY
OF SOAP AND WATER FOR AT LEAST 15 MINUTES. EYE: IMMED FLUSH WITH
PLENTY OF WATE R FOR AT LEAST 15 MINUTES.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE IDENTIFIED BY MANUFACTURE.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. CAREFULLY
SWEEP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA. AVOID CONT W/EYES,
SKIN, CLOTHING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE AN
APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUME/DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANLDING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:356F,180C
Vapor Density:13
Solubility in Water:NEGLIGIBLE(<0.1%)
Appearance and Odor:ORANGE CRYSTALLINE POWDER, ODORLESS.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE DOCUMENTED BY MANUFACTURE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE I/A/W APPLICABLE FEDERAL, STATE, AND
LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.